Announcement

Collapse
No announcement yet.

Quick Detailer for Quartz coating

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick Detailer for Quartz coating

    Hi
    I've been using the Gyeon Can Coat Quartz on my car and am really pleased with the results
    After a wash I've used the Gyeon Cure as a quick detailer (recommended) but found it leaves streaks that are hard to remove...not very quick at all as it turns out
    Can anyone suggest some alternative to use that's easier?
    I use Spray Magic wax on the wife's care but would using it on my car cause problems like having to prep coat before using reusing Can coat?

    Tried to upload a pic but failed

  • #2
    You might want to try this. Zero streaks https://www.zas.com.au/product/421/o...eal_236ml.html
    Zen Automotive Suppliers Pty Ltd
    Premium Car Detailing Products & Accessories
    Email: sales@zas.com.au
    Like our Facebook Page

    Comment


    • #3
      I canít recommend anything higher than Optiseal.

      Iíve used much more expensive spray sealants in the past and they donít compare for reliability.
      Apply once dry, and then just top up as a drying aid.


      Sent from my iPhone using Tapatalk

      Comment


      • #4
        Thanks Guys
        I'm getting a bit confused though (which can be easy)
        Joel, do I use what you suggested or this Or both together?
        https://www.zas.com.au/product/427/o...cer_504ml.html



        Comment


        • #5
          Originally posted by CPV35
          Thanks Guys
          I'm getting a bit confused though (which can be easy)
          Joel, do I use what you suggested or this Or both together?
          https://www.zas.com.au/product/427/o...cer_504ml.html


          If youíre after a straight Quick Detailer than the one you linked is correct, but Opti-Seal is more along the lines of what you were using previously but without the application issues.

          You donít need both. One or the other.
          Zen Automotive Suppliers Pty Ltd
          Premium Car Detailing Products & Accessories
          Email: sales@zas.com.au
          Like our Facebook Page

          Comment


          • #6
            Thanks Joel
            Just realised I had some of that QD left in the back of my cupboard from a previous car so ordered more :-)

            Comment


            • #7
              Usually dilute Cure 50/50 with distilled water; much easier to use. Fairly common practice with Cure.

              Comment

              Working...
              X