Announcement

Collapse
No announcement yet.

Removing contaminants from Optimum gloss coated wrap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JK71
    replied
    Thanks Joel Iíll investigate it a bit further before I remove it all next time!


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Joel_ZAS
    replied
    Itís hard to say what to use without knowing exactly what it is.

    Assuming itís sap, IPA is usually good for this but youíll need to be careful with the matte vinyl.

    Leave a comment:


  • JK71
    started a topic Removing contaminants from Optimum gloss coated wrap

    Removing contaminants from Optimum gloss coated wrap



    Hi all, I top wrapped my Hilux with satin black vinyl then coated the whole car with 2 coats of Opti gloss coat, pretty happy with the results. When doing maintenance washes the roof and bonnet both have collected some contamination, not sure if itís tree sap or tar, but itís only on the tops. What would be best to Decon this with? The black stuff is actually a lighter colour underneath, it does pick off easily with a finger nail but looking for a quicker solution as there is usually quite a bit. Would iron x or maybe poorboys bug and tar be ok for the coating?
    Sorry the photos donít show the issue as I have just cleaned it all off before I thought to write this, using ipa and also a citrus based glue remover, just posted the pics for bragging.


    Sent from my iPhone using Tapatalk
Working...
X